Antigravity A1 Charging Hub

Antigravity A1 Charging Hub

Antigravity A1 Charging Hub - Fast, smart and portable

Charge up to three A1 batteries quickly with PD/PPS support. The device is compact, foldable and can also be used as a USB-C power bank. Perfect for travel and outdoor creators

, the battery charging hub impresses with its clear functions and intuitive operation during normal charging. The integrated USB-C port enables a reliable power supply - for best results, we recommend the Antigravity 65W GaN fast charger or another charger that supports USB-PD or PPS protocols. The status display allows you to keep an eye on the current battery level and system status at all times. With the function button, you can call up the battery status by pressing it once or activate Smart Power Pooling mode by holding it down for longer. The battery slot is compatible with both standard and high-performance flight batteries, while the practical battery holder can simply be folded up when not in use.

Normal charging

1. Press the button to fold down the battery holder.
2. This allows you to charge three batteries at the same time.
3. Insert the flight battery into the slots provided on the battery charging hub until it clicks into place.
   Caution: Take care not to pinch your fingers when inserting the battery.
4. Connect the charging hub to a power socket using the USB Type-C cable supplied.
5. The hub charges the batteries one after the other, depending on how much power they have left, and the status display shows the charging status during the charging process.
6. When the charging process is complete, the status LED on the drone's battery stops flashing and goes out.
7. Squeeze and hold the clips at the top of the battery to remove it.
8. Smart power bundling - Insert two or more flight batteries into each slot of the charger until they click into place.

Note: Be

careful not to pinch your fingers when inserting the battery.

1. Simply press the function button on the charging hub to start Smart Power Pooling.
2. Once it is running, the status field will show how batteries with a low charge are charging the battery with the highest capacity.
3. To stop Smart Power Pooling, simply press and hold the function button during the process.

Note:

The battery level must be above 20% for Smart Power Pooling to work.

Powerbank

1. Insert at least one flight battery into the battery charging hub.
2. Connect an external device (such as a cell phone or motion controller) to the USB Type-C port on the hub.
3. Press the function button once to charge the external device with the power from the inserted battery(ies).
4. To end the charging process, simply disconnect the external device from the hub.

Note

If you want to use the power bank mode, the battery level in the battery compartment must be above 10 %.