DJI Osmo 360 Third-Person Helmet Mount Bundle

DJI Osmo 360 Standard Combo

Native 8K 360° Video & Studio-Quality Audio

The state-of-the-art square sensor design provides 1-inch 360° imaging [1] with large 2.4-μm pixels and delivers native 8K clarity. Capture the full 360° perspective with unparalleled detail. Direct connection with two DJI microphone transmitters [2] for high-quality audio recording of two people.

Impressive low-light imaging & extended battery life

Thanks to the dual 1-inch 360° fields of view [1] and an f/1.9 aperture, capture first-class image quality even in low light. With a powerful image processing chip and superior heat dissipation, you can record in 8K/30fps for up to 100 minutes [3]. Capture the adventure for an additional 180 minutes [3] with the battery extender stick [4].

Easy mounting & 170° ultra-wide field of view

Osmo 360 works seamlessly with Osmo Action quick-release accessories, offering adaptability for multiple creative scenarios. Quickly switch to single lens mode to turn it into a traditional action camera, with options to shoot 4K/120fps at 170° ultra wide angle or 5K/60fps at 155° super wide angle.

360° HorizonSteady & low temperature recording

Enjoy seamless stability with 360° HorizonSteady, which keeps your footage perfectly aligned, even during intense shakes and twists. Record 360° videos with an invisible selfie stick effect for an immersive third-person perspective. Even in extreme temperatures as low as -20° C, you can film effortlessly and take on any challenge with confidence.

[1] When shooting 360° content, the Osmo 360's CMOS sensor provides an effective image area equivalent to that of a 1-inch CMOS sensor with a 4:3 aspect ratio.
[2] Direct connection with the first-generation DJI Mic is not supported. DJI microphones are sold separately.
[3] Data collected in a controlled environment. For more information, please visit DJI's official website.
[4] Sold separately.

DJI Osmo

Third-Person

Helmet Mount Kit

Osmo Third-Person Helmet Mount Kit- The curved base fits the helmet perfectly and ensures a secure fit. Together with a stable, straight rod made of high-strength carbon fiber, it enables impressive shots from a third-person perspective.

Notes

1

. When attaching the base, press firmly for more than 30 seconds and allow to rest for 30 minutes to ensure adhesion.
2. This product is intended for single use only on clean, curved surfaces. If the surface is not sufficiently smooth, first apply the supplied adhesive pad and then attach the base.
3. The ideal application temperature is between -10 °C and 40 °C.
4. After wearing, be sure to tighten the lock nut to prevent wobbling or shifting due to significant vibration during movement.
5. When shooting 360° images, the bottom of the camera facing the helmet may be closer than the minimum required distance for stitching. Adjust the angle and composition to avoid errors when stitching close to the ground.