DJI Mic 3 (2 TX + 1 RX + Charging Case)

DJI Mic 3 (2 TX + 1 RX + Charging Case)

DJI Mic 3 - Compact professional wireless microphone for maximum audio quality

The DJI Mic 3 is the perfect solution for anyone looking for the highest sound quality in a compact format. Whether for professional video recording, interviews, podcasts or live streams, this advanced mini wireless microphone system reliably delivers impressive sound with minimal size.

Small, light, versatile

The DJI Mic 3 transmitter is compact, lightweight and unobtrusive. It supports both magnetic and clip-on mounting methods. The removable, rotatable clip allows you to flexibly adjust the angle of the microphone, whether it's mounted sideways or upside down, to ensure optimal audio capture in any scenario.

All in one, ready to go

The charging case holds two transmitters and one receiver. Each transmitter fits in with the windscreen and either the magnet or the magnetic clip - these do not need to be removed. When the transmitters are stored with the clips, the lid also provides space for the magnets and the lockable audio adapter cable [1], so everything is organized and ready to use.

Adaptive gain control for balanced volume [3]

• Automatic: Automatic mode effectively prevents audio signals from being overdriven and is therefore ideal for outdoor areas with large volume fluctuations, such as sporting events.
• Dynamic: Dynamic mode automatically adjusts the amplification to changes in volume, ensuring a consistent volume - ideal for quiet indoor spaces such as studios.

Three voice tone presets to suit your style [4]

• Regular is the default setting, providing a clean, natural and balanced sound.
• Rich emphasizes the lows for a fuller, more powerful sound.
• Bright emphasizes the highs and gives your voice extra clarity and brilliance.

Two-stage noise reduction for focused sound [5]

• Basic: The Basic stage is ideal for quiet indoor environments and reduces fan, air conditioning and reverberation noise while keeping your voice clear.
• Strong: The Strong level is ideal for noisy environments as it significantly reduces ambient noise for clearer voices.

When the windscreen is attached, the transmitter effectively reduces wind noise and other unwanted sounds, delivering clear and crisp sound even in windy or noisy environments - ideal for live streaming, vlogging and more.

Effortless control, smooth operation

• Adjust parameters on the receiver: The receiver features a 1.1-inch AMOLED touchscreen and a rotary knob so you have gain, battery status and modes at your fingertips.
• Adjust settings quickly and enjoy flexible, efficient operation.
• App-based control and firmware update: Use the DJI Mimo app to fine-tune settings and update firmware directly from your phone. Enjoy fast, convenient parameter adjustments and effortless upgrades

. Robust performance, endless possibilities

The DJI Mic 3's receiver can be connected to up to four transmitters simultaneously, allowing you to record four audio sources at once. The main receiver can also synchronize audio with up to seven additional receivers. Whether it's a group interview or a multi-camera production, you'll get crystal-clear audio on every device, making post-production a breeze.

Flexible, versatile channel settings

The receiver lets you choose between mono and stereo (two-channel) modes. You can output the audio signals from each transmitter separately or merge them into a single track to suit any creative scenario.

Four-channel output [2], effortless editing

In Quadraphonic mode, the DJI Mic 3 Receiver supports independent output of four audio tracks in conjunction with selected Sony cameras or computer software. This allows for precise track separation and flexible mixing, giving you greater creative freedom in post-production.

Dual-band reliability, rock-solid transmission

The DJI Mic 3 supports automatic frequency hopping between 2.4 GHz and 5 GHz bands [6] with a transmission range of up to 400 meters [7]. Its robust anti-interference capabilities ensure stable audio transmission, even in complex wireless environments such as trade shows.

Lossless transmission, pristine audio

When Lossless Audio is enabled [8], the transmitter delivers uncompressed 48 kHz 24-bit audio directly to the receiver. This ensures that every recording is captured in stunning detail.

Dual-file 32-bit float internal recording

No more worries about lost audio - internal recording protects your material from wireless interference or device failure. With dual-file internal recording, the DJI Mic 3 stores both the original track and an algorithm-enhanced version [9], optimizing your workflow and making your creative process smooth.

32-bit internal float recording

With support for 32-bit internal float recording, the DJI Mic 3 offers a high dynamic range that not only delivers high-quality recordings, but is also more adaptable to complex sound environments. It excels at capturing every nuance of a voice, from soft whispers to booming decibel levels, offering more reliability in irregular sound scenarios and more flexibility in post-production.

Built-in timecode for precise synchronization

DJI Mic 3 offers high-precision timecode support [10], with the transmitter embedding timecode data during internal recording and the receiver supporting both timecode input and output. With a deviation of less than one frame in 24 hours [11], you can instantly match multi-camera footage in post-production, making editing faster and more efficient.

Hassle-free file export

When you're done shooting, simply use the charging case and USB-C data cable to connect both transmitters to your computer or smartphone [12]. Instantly transfer all internally recorded files in one go - editing and sharing couldn't be easier.

28 hours of extended battery life [13]

One transmitter lasts up to 8 hours [14], one receiver up to 10 hours [14]. A fully charged cradle provides approximately 2.4 full charges for a total of 28 hours of extended operation [13]. Long video recordings and live streams can be easily handled without worrying about running out of power.

5-minute fast charging

Charge the transmitter and receiver in just 5 minutes and use them for up to 2 hours [15] - ideal for a quick power boost. With 3C fast charging support, a full charge only takes about 50 minutes [16], so you can get back to work in no time.

DJI Mic Series Camera Adapter [22]

This adapter connects the DJI Mic 3 receiver directly to the MI hot shoe of a Sony camera, enabling 48 kHz, 24-bit digital audio recording and supporting independent four-channel output.

DJI Mic 3 Multicolor Windscreen [22]

Windscreen in various colors that can be easily matched to clothing, environment, etc.

DJI Mic 3 Mobile Phone Adapter (Lightning) [22]

Allows the DJI Mic 3 receiver to be connected to Apple mobile devices with a Lightning connector for audio recording

*All of the above data was collected in a controlled environment. Actual experience may vary. Refer to the official DJI product page for usage settings and recommendations.

1. When storing the accessory in the charging case, avoid stacking it to prevent damage to the receiver screen.
2. To achieve the 4TX + 8RX setup or four-channel output, additional accessories must be purchased separately. The four-channel output function is only supported by certain Sony camera models (which require the DJI Mic Series Camera Adapter) and certain computer software (via USB output).
3. For details, please refer to the compatibility list on the Downloads page of the official DJI Mic 3 website.
4. The Adaptive Gain Control function can be configured via the receiver or DJI Mimo app and is disabled by default.
5. The voice tone preset modes can be selected via the receiver or DJI Mimo app, with the default setting being "Normal".
6. The Noise Cancellation feature is off by default, but can be enabled via the receiver, DJI Mimo app or a device connected directly via the OsmoAudio™ ecosystem and set to either Strong or Basic level. When using the receiver with multiple transmitters, you can adjust the noise canceling settings for each transmitter individually or for all transmitters simultaneously. If an Osmo Action 5 Pro, Osmo Action 4 or Osmo Pocket 3 is connected directly via OsmoAudio™, the settings can be adjusted via the product interface.
7. If the transmitter is connected directly to a smartphone, the settings can be adjusted within the Mimo app.
8. The permitted operating frequency varies depending on the country and region.
9. Refer to local laws and regulations for more information.
10. Measured with DJI Mic 3 (2 TX + 1 RX + charging case), with lossless audio turned off, in an open, interference-free environment.
11. When lossless audio is enabled, the battery life of the transmitter under nominal operating conditions is reduced by approx.
12. 2 hours and the maximum transmission range is reduced by approximately 50%.
13. Algorithm based enhancements include voice tone presets, low cut, noise reduction and adaptive gain control.
14. Details on supported timecode modes, frame rates and timecode output formats can be found on the FAQ page of the official DJI Mic 3 website.
15. Measured with the DJI Mic 3 (2 TX + 1 RX + charging case) in an environment free of electromagnetic interference, with continuous power supply to the transmitters and receivers after timecode synchronization and during 24 hours of continuous recording.
16. For a list of compatible devices, please refer to the Downloads page on the official DJI Mic 3 website.
17. Measured with DJI Mic 3 (2 TX + 1 RX + charging case) in conjunction with a fully charged charging case, with functions such as noise reduction and internal recording turned off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver and the receiver connected to a camera via the 3.5mm audio cable.
18. Measured with DJI Mic 3 (2 TX + 1 RX + charging case), with features such as noise reduction and internal recording turned off, during close-range audio recording in noise-free conditions, with both transmitters connected to the receiver and the receiver connected to a camera via the 3.5 mm audio cable.
19. Measured in a controlled environment with the battery level of the transmitters and receiver below 25%, using a charger with 5 V output voltage, with noise suppression turned off, while
recording audio
20. at
close range
21. .cation, during close-range audio recordings under interference-free conditions, with both transmitters connected to the receiver and the receiver connected to a camera via the 3.5 mm audio cable.
22. The data was collected in a controlled environment and should be considered for reference only.
23. This function is only effective when the device is switched on.
24. If the auto power off function for the transmitter and receiver is enabled in the DJI Mimo app or on the receiver screen, both devices will automatically power off if no pairing signal is detected after 15 minutes.
25. If your phone uses a Lightning interface, the receiver cannot be powered by the phone's battery without an external power source.
26. To enable simultaneous charging and use, you must purchase the DJI Mic 3 Mobile Phone Adapter (Lightning) separately.
27. Some functions of the DJI Mic 3 cannot be configured from the device connected directly via the OsmoAudio™ ecosystem.
28. For details, please refer to the FAQ page on the official DJI Mic 3 website.
29. Only one transmitter can be directly connected and used as an audio input source at a time.
30. When the transmitter is directly connected to a smartphone via Bluetooth, it does not support audio recording with the phone's native camera app; it only works with third-party apps. A list of compatible apps can be found on the Downloads page on the official DJI Mic 3 website.
31. Sold separately.