Rode Wireless GO II TX

Rode Wireless GO II TXRode Wireless GO II TXRode Wireless GO II TXRode Wireless GO II TXRode Wireless GO II TXRode Wireless GO II TX
123,00 €
VAT incl.
Shipping free
Best-Price-Request

The RØDE Wireless GO II TX is primarily aimed at owners of the RØDE Wireless GO II Single who wish to add a second transmitter to their wireless system, e.g. for interviews. The Wireless GO II receiver is already two-channel by default.

Top-Features

Top-Features


  • for expanding the Wireless GO II Single with a second transmitter
  • Terminal transmitter with integrated condenser microphone
  • Polar
  • pattern: omnidirectional
  • Frequency response: 50 Hz - 20 KHz
  • 3.5 mm TRS jack for external microphone
  • Built-in audio memory for 40 hours Onboard recording (backup)
  • Transmission:
  • Toll-free and registration-free 2.4 GHz band
  • Range to receiver: 200 m (free line of sight)
  • Power supply
  • :
  • Built-in LiPo battery (up to 7 hours)
  • Charging, updates and backup transfer via side USB-C jack
  • Compatible with Wireless GO II receiver and Wireless ME receiver
  • Also compatible with RØDECaster Duo, RØDECaster Pro II, Streamer X
.

Recommendation

Productinformation 

Details


Rode Wireless GO II TX

Digital microphone transmitter

The

Wireless GO II TX already has a high-quality microphone built in, which has been optimally tuned for voice transmission. With the clip on the back, the transmitter module can be easily attached to clothing. In case the transmitter module is too conspicuous in the picture, you can use the 3.5 mm TRS jack on the side and connect an external microphone there - for example the Lavalier GO or Lavalier II.

The

Wireless GO II TX has built-in audio memory for 40 hours of onboard recording (backup).

Wireless ME uses the toll- and registration-free 2.4 GHz band for transmission, and the range is a whopping 100 meters with a clear line of sight. The internal LiPo battery takes care of the power supply, you can work for up to 7 hours before you have to recharge the module. Charging, firmware updates and backup transfers are done via the USB-C port on the side.

For outdoor shots, you should always use the included fur windshield

.

Simply pull back its hair and attach the windscreen so that the two white dots on the windscreen line up with the two black dots on the module. Another quarter turn to the right and it sits securely

on the module.
Features
suitable forRode Wireless GO II
Power Supply
Battery lifeup to 7 hours
battery typebuilt-in LiPo battery
Dimensions
Dimensions46 x 44 x 19 mm
Weight (incl. battery and memory card)30 g
Other features
FunctionsRange up to 200 m (free line of sight) - Internal microphone: miniature condenser capsule - Polar pattern: omnidirectional - Limiting sound pressure level: 100 dB SPL (1 kHz @ 1 m) - Inherent noise: 22 dBA
other functionsFrequency response internal microphone: 50 Hz - 20 KHz - Input for external microphone: 3.5 mm TRS (mono)

What do you think?

Rode Wireless GO II TX

Providing your e-mail address is voluntary and is only used for internal purposes.
Your e-mail address will not be published.
Your opinion: *
The text must consist of at least 50 characters. CAUTION: HTML is not supported!
Images:
* necessary information. Please read our Privacy policy as well as our Conditions of use.

  • Rode Wireless GO II TX
  • USB-C to USB-C cable (30 cm)
  • 2x outdoor fur windshields.

Do you have a question for our experts?

Find the answer quickly and easily on our customer service page

The Foto Erhardt Newsletter

Simply subscribe and benefit as a newsletter recipient every week:

Our privacy policys.