Voigtländer Ultron 27mm f2 Fuji X-Mount black customer return

Voigtländer Ultron 27mm f2 Fuji X-Mount black customer return

The Voigtländer 27 mm F2.0 Ultron X is a completely new development and was designed exclusively for the Fujifilm APS-C sensor. It is a standard lens with manual focusing and large aperture that covers an image circle in APS-C format and has an angle of view similar to a 40 mm full-frame equivalent.

Despite its relatively large aperture of F2.0, the lens is very compact and narrow, with a length of around 23 mm from the bayonet. The closest focusing distance is just 25 cm, making the 27 mm F2.0 Ultron X particularly suitable for imaging small objects and for food photography, for example. The focus ring is equipped with a ribbed elevation for intuitive and precise control. The aperture ring also has an accurately milled structure and can be adjusted in 1/3 increments, while the 10 aperture blades ensure an extremely smooth focus gradient. Overall, the lens conveys a rich and very sensitive handling and is characterized by excellent image results.

The 27 mm F2.0 Ultron X is also equipped with electronic contacts that ensure reliable communication between the lens and the camera body. Functions such as focus check, shooting distance display, in-camera image stabilization and parallax correction are supported on certain models * (please refer to the notes at the end!).

The Voigtländer 27 mm F2.0 Ultron X offers the right mix of perspective, image quality and instinctive handling for many photographic situations. Thanks to its compactness and low weight of 120 g, it always remains a pleasantly discreet companion in everyday photography.

Important notes on data communication:

There are restrictions in connection with various camera models.
Transfer of EXIF data - possible **(Note 1) (Note 2)
Focus magnifier (focus peaking) - possible
Distance display - possible
Image stabilization - possible for all models with image stabilization function
Parallax compensation -only possible with X-Pro3 Body

*Communication compatiblemodels and firmware (Note 3)
Body / Firmware
X-H2s V3.01 or higher
X-H2 V1.21 or higher
X-Pro3 V1.23 or higher
X-T5 V1.03 or higher
X-S10 V2.10 or higher
X-H1 V2.13 or higher
X-T4 V1.25 or higher
X-T3 V4.12 or higher
X-T2 V4.40 or higher *4
X-T30 V1.41 or higher
X-T30 II V1.00 or higher
X-E4 V1.04 or higher

*Modelsthat do not support data communication (Note 4)
XT-1, X-Pro2, X-Pro1, X-T20, X-T10, X-T200, X-T100, X-E3, X-E2, X-E1, X-M1, X-A5, X-A3, X-A2, X-A1

Please check the current support status on the Cosina website.

NOTES
*1 It is recommended to set the aperture value display setting from TNo to FNo in the camera menu.
*2 It is recommended to change the depth of field indicator in the camera menu to the film standard (the same value as the depth scale engraved on the lens).
*3 Please use the latest firmware as the performance may not run or some of the functions may be limited if the firmware is older than the one listed. To check the firmware of the camera body you are using and get the latest firmware, please refer to the manufacturer's instruction manual.
*4 When using with a model that does not support data communication, change the body setting [Release without lens] to "ON". When using the X-T2, you can display the aperture value by changing the aperture value display from TNo to FNo in the settings.