Voigtländer Ultron 27mm f2 Fuji X-mount black

Voigtländer Ultron 27mm f2 Fuji X-Mount black

The Voigtländer 27mm F2.0 Ultron X is a completely new development and has been exclusively adapted to the Fujifilm APS-C sensor. It is a standard manual focus lens with a large aperture that covers an image circle in APS-C format and has an angle of view similar to a 40 mm full-frame equivalent.

Despite its relatively large aperture of F2.0, the lens is kept very compact and narrow, with a length from the bayonet of about 23 mm. The closest focusing distance is only 25 cm, making the 27 mm F2.0 Ultron X particularly suitable for imaging small objects and also for food photography, for example. The focus ring is equipped with a ribbed elevation for intuitive and precise control. Likewise, the aperture ring has an accurately milled structure and can be adjusted in 1/3 stops, while the 10 aperture blades ensure an extremely smooth focus gradient. Overall, the lens conveys a rich and very sensitive handling and features outstanding image results.

The 27 mm F2.0 Ultron X is also equipped with electronic contacts that ensure reliable communication between the lens and camera body

.

Functions such as focus checking, shooting distance display, and in-camera image stabilization and parallax correction are supported on certain models * (please see notes at the end!)

The Voigtländer 27 mm F2.0 Ultron X offers the right mix of perspective, image quality, and instinctive handling for many photographic situations. Due to its compactness and low weight of 120 g, it always remains a pleasantly discreet companion in everyday photography

Important notes regarding data communication:

There are restrictions in connection with different camera models.
EXIF data transfer - possible **(Note 1) (Note 2)
Focus Peaking - possible
Distance display - possible
Image stabilization - possible with all models with image stabilization.

on all models with image stabilization function
Parallax compensation -possible on X-Pro3 body only

*Communication compatiblemodels and firmware (

3)
Body / Firmware
X-H2s V3.01 or higher
X-H2 V1.21 or higher
X-Pro3 V1.23 or higher
X-T5 V1.03 or higher
X-S10 V2.10 or higher
X-H1 V2.13 or higher
X-T4 V1.25 or later
X-T3 V4.12 or later
X-T2 V4.40 or later *4
X-T30 V1.41 or later
X-T30 II V1.00 or later
X-E4 V1.04 or later

*Modelsthat do not support data communication (Note 4)
XT-1, X-Pro2, X-Pro1, X-T20, X-T10, X-T200, X-T100, X-E3, X-E2, X-E1, X-M1, X-A5, X-A3, X-A2, X-A1

Please check the Cosina website for the latest support status

NOTES
*1 It is recommended to set the aperture value display setting from TNo to FNo in the camera menu.
*2 It is recommended to change the depth of field indicator in the camera menu to the film standard (the same value as the depth scale engraved on the lens).
*3 Please use the latest firmware, as the performance may not run or some of the functions may be limited if the firmware is older than the one listed. To check the firmware of the camera body you are using and obtain the latest firmware, please refer to the manufacturer's instruction manual.
*4 When using with a model that does not support data communication, change the body setting [Release without lens] to "ON". When using the X-T2, you can display the aperture value by changing the aperture value display in the settings from TNo to FNo