Visible Dust 1.6x Swabs Green

Visible Dust MXD Swabs green 1.6x (16mm)

These swabs are an excellent tool for thorough sensor wet cleaning. They are as soft and gentle on the sensor as the Orange Series Swabs and are compatible with all cleaning solutions in the VisibleDust range.

• Microfiber structure - Gentle on the sensor (Swabs for sensor size 1.6x)
• No linting (closed flow all around), no threads
• Optimal distribution of liquid through mini-channels
• One swab per cleaning, but can be used on both sides (wet and/or dry)
• Suitable for all VisibleDust liquids
• 12 pcs. per package

Visible Dust provides the following tips for use:

1. Follow the instructions for sensor cleaning in your camera's manual
2. Make sure that there are no loose dirt particles left on the sensor surface (pre-cleaning with cleaning brush or bellows)
3. Apply 2 - 4 drops of the cleaning fluid to the edge of the swab
4. Wait briefly until the swab is evenly saturated with the liquid (the swab should not dry out again)
5. Clean the sensor by placing the moistened side of the swab on one side of the sensor and wiping evenly with light pressure to the other side. Clean the center of the sensor by placing the swab flat and rotating it around itself.
6. Allow sensor to dry completely after cleaning
7. Repeat procedure if necessary

VisibleDust - Download compatibility list here