NANLINK RGB and Bi-Color wireless remote control

NANLINK RGB and Bi-Color wireless remote control.

Depending on the luminaire type, the wireless remote control can be used to adjust brightness, color temperature, green/magenta correction, color and color saturation. For some luminaires, the wireless remote control can also be used to select lighting effects and manually trigger certain effects (firmware with protocol 2.0 or higher required).

Easy to use: selection buttons for white light mode, color mode, effect mode and lighting effect. Step-up/step-down buttons for setting radio channel, brightness, color temperature, green/magenta correction, color, and color saturation; fast scroll when button is held down. Trigger button for manual triggering of certain lighting effects. Another key can be used to turn the light off and, when pressed repeatedly, turn it on again at the previously set brightness.

Several lights can be controlled together or independently, depending on whether the same or a different radio channel has been selected in each case.